Authors submitting to one of the three ASTRO Journals, the International Journal of Radiation Oncology • Biology • Physics, Practical Radiation Oncology and Advances in Radiation Oncology should use the instructions below when submitting a manuscript. Authors unsure of which journal to submit to should view this outline of each journal's scope. Journal-specific information such as article type descriptions can be found at the pages linked here:
How to Submit
ASTRO journals accept submissions and correspondence electronically through a web-based submission management system that enables authors to track their submissions online. Authors must be registered to use the system.
Our online submission system guides you through the process of entering your article details and uploading your files. The system converts your article files to a single PDF file used in the peer-review process. A portion of submissions are declined without external review if such manuscripts are judged to be inappropriate for the journal's readership. If review is required, authors can expect to learn of rejection or acceptance in approximately 4 to 6 weeks, depending on the turnaround time for reviews.
All correspondence, including editor decisions and requests for revisions, is conducted by e-mail through Editorial Manager or at the following email addresses:
Red Journal: email@example.com
Copy Editing and Translation Services Available
ASTRO is pleased to partner with Editage to offer a 10% discount for authors seeking copy editing and translation services. Please use this Author Services link to receive the discount. These services are offered for the benefit of authors, and individuals who participate will remain anonymous. Copy editing and translation are provided by Editage.
There is a $75 fee to submit full-length clinical investigations, scientific letters, and critical review submissions to the Red Journal EXCEPT the following:
- Biology submissions
- Physics submissions
- Clinical investigation submissions where the lead or corresponding author resides in a low- or middle-income country (according to the World Bank)
During the submission process, authors will be directed to the Submission Start site to complete payment by a credit card, if applicable.
There is no fee to submit to PRO or to publish in the journal.
There is no fee to submit to Advances; however, if your manuscript is accepted, the following fees are charged:
||ASTRO Member Charge
ASTRO provides a checklist and title page template to help facilitate new submissions and revisions.
Anonymized Peer Review
ASTRO journals use an anonymized review process. This means that authors do not know the identity of their reviewers, and the reviewers do not know the identities of the authors. Reviewers provide comments for the editors and the authors. The editor assigned to the manuscript reads all reviews and forwards a recommendation to the Editor-in-Chief, who approves all suggested changes.
All scientific papers must be anonymized including full length articles, reviews, and teaching cases. Editorials and other communications do not need to be anonymized. For a full list, see the specific article type instructions for each journal linked below:
For submissions to the Red Journal, anonymization is not required for prospective phase II and III studies from major international co-operative trial groups as these trials have usually been presented at meetings with high visibility and are well known to the editorial teams and the reviewers.
What to Anonymize
Please anonymize the following information in the manuscript document, figures, tables, supplementary files and online submission form title and abstract fields of your submission:
- Author names and institutions, including when declaring institutional review board approval.
- Trial names, numbers, and registry identifiers.
- Citations of previous works identified as belonging to the authors. For example, “In our previous study ” reveals the cited work as belonging to the authors. Revise to: “Recent studies show ”.
Anonymized text must always be removed or replaced with filler text. Examples of filler text are:
- Anonymized for Review
Do not electronically black out the text. When anonymizing references, please leave the in-text reference number as is, but replace the entire corresponding line in the references section except the number with “XXXX” or similar.
1. Smith J, Jones AM. Cardiac denervation in diabetes. BMJ. 1973 Dec 8; 4: 584-586. (Not anonymized)
1. XXXX. (Anonymized)
Reviewers see all documents submitted except the cover letter, title page, and disclosure forms. Do not include acknowledgements, conflict of interest statements or funding statements in the anonymized manuscript document. For more information please refer to https://www.elsevier.com/reviewers/peer-review.
ASTRO journals accept title page, summary, anonymized manuscript, and table files submitted only as Word or LaTeX documents. Information on submitting a manuscript using LaTeX is available here. LaTeX submissions must still conform to the guidelines listed on this page and the specific article type guidelines for each journal. Figure file requirements are detailed in the Artwork section.
- Use single-column format
- Double-space the entire manuscript document including the abstract and references
- Use boldface, italics, subscripts, superscripts and special characters where appropriate
- Do a spelling and grammar check before submitting
- Save in the file format of the word processing program used
- Use the word processor’s line-numbering tool; the submission system will automatically include line numbers
- Use the word processing program’s justify text or hyphenate words features
- Include tables or figures in the manuscript document
Article word limits include the abstract, body, and figure captions. References are not included, though authors should note any limits on the number of references for their article type.
Word limits for each journal's specific article types can be found on the pages linked below:
You may include a letter to the Editor-in-Chief introducing your manuscript or explaining matters not conveyed elsewhere in the submission process.
Title Page (With Author Details)
- The title and short running title (46 characters or fewer, including spaces)
- The authors' names and affiliations
- The name, telephone number, mailing address and e-mail address of the corresponding author and the author(s) responsible for statistical analyses
- A conflict of interest statement
- A funding statement
- A data sharing statement
- Acknowledgments (if any)
Anonymized Manuscript (No Author Details)
The main body of the paper should not include any identifying information, such as the authors' names, affiliations, or direct references to their previous work.
The anonymized manuscript should include the following:
- Abstract: A brief, structured overview of the research conducted, including its purpose, the methods and materials used, the results and the conclusions.
- Introduction: State the objectives of the work and provide an adequate background; avoid a detailed literature survey or a summary of the results.
- Methods and Materials: Provide enough detail so that the work can reproduced. Methods already published should be indicated by a reference; only relevant modifications should be described.
- Results: Should be clear and concise.
- Discussion: This should explore the significance of the results, not repeat them. Results may be combined with Discussion. Avoid extensive citations and discussion of published literature.
- Conclusions: The main conclusions of the study may be presented in a short Conclusions section, which may stand alone or form a subsection of a Discussion or Results and Discussion section.
- References: List the references in the order in which they appear in the text, making sure each reference cited is provided and vice versa.
- Figure Captions: Include a caption for each figure. The caption should consist of a brief title and a description of the illustration. Be sure to explain all symbols and abbreviations used within the figure. Do not include figures or tables in the anonymized manuscript document.
Table File (Anonymized)
Include all tables in one Word document with no identifying information.
Number tables consecutively with their appearance in the text. Footnotes in tables can include definitions of abbreviations, designated footnotes and table legends, in that order. Designated footnotes take standard symbols (*, †, ‡, §, ¦, ¶, #, **, ††, for example). Place footnotes to tables below the table body. Avoid vertical lines. Be sparing in the use of tables and ensure that the data presented in tables do not duplicate results described elsewhere in the article.
Figure Files (Anonymized)
Figures should be identified in the figure files, in the file name, and in the description column on upload. Each figure should be uploaded separately with no identifying information.
- Number the figures sequentially as in the text.
- Use a logical naming convention for your artwork files.
- Size the figures close to the desired dimensions of the printed version.
- Submit each figure and sub-figure (1a, 1b) as a separate file.
Supplementary Material (Anonymized)
This material could be in the form of tables, figures, appendices, extraneous methods, data sets, etc. with no identifying information.
If there is more than one supplementary file/appendix, identify as A, B, etc. Formulas and equations in appendices should be given separate numbering: Eq. (A1), Eq. (A2), etc.; in a subsequent appendix, Eq. (B1) and so on. Similarly, for tables and figures: Table A1; Fig. A1, etc.
If you are using a table grid, use only one grid for each individual table and not a grid for each row. If no grid is used, use tabs, not spaces, to align columns. Source files of figures, tables and text graphics will be required whether or not you embed your figures in the text. See also the section on Electronic artwork.
(See also the Guide to Publishing with Elsevier:).
Uniform Disclosure Form
Each author must complete and submit an International Committee of Medical Journal Editors uniform disclosure form, available for free download at http://www.icmje.org/. Please upload these forms individually in PDF format for each author.
Use footnotes sparingly. Number them consecutively throughout the article, using superscript Arabic numbers. Many word processors build footnotes into the text, and this feature may be used. Should this not be the case, indicate the position of footnotes in the text and present the footnotes themselves separately at the end of the article. Do not include footnotes in the Reference list. Footnotes in tables can include abbreviations, designated footnotes, and table legends, in that order, as needed. Designated footnotes take standard symbols (*, †, ‡, §, ¦, ¶, #, **, ††, and so on).
If you are submitting an article prepared with Microsoft Word containing embedded math equations then please read this (related support information).
Please submit math equations as editable text and not as images. Present simple formulae in line with normal text where possible and use the solidus (/) instead of a horizontal line for small fractional terms, e.g., X/Y. In principle, variables are to be presented in italics. Powers of e are often more conveniently denoted by exp. Number consecutively any equations that must be displayed separately from the text (if referred to explicitly in the text).
Follow internationally accepted rules and conventions: use the international system of units (SI). If other units are mentioned, please give their equivalent in SI.
A detailed guide on electronic artwork is available here. Make sure your artwork is sized correctly and named appropriately.
If your electronic artwork is created in a Microsoft Office application (Word, PowerPoint, Excel), please send it in that format. Images not made in Microsoft must be:
- Vector drawings, with all fonts embedded.
- Color or grayscale photographs (halftones), keep to a minimum of 300 dpi.
- Bitmapped (pure black & white pixels) line drawings, keep to a minimum of 1000 dpi.
- Combinations bitmapped line/half-tone (color or grayscale), keep to a minimum of 500 dpi.
If you submit usable color figures, Elsevier will, at no additional charge, display them in color online. For color reproduction in print, you will receive information regarding the costs from Elsevier after receipt of your accepted article. Please indicate your preference for color: in print or online only. For further information on the preparation of electronic artwork, please see Elsevier’s artwork instructions.
We offer complimentary illustration services for line drawings and graphs in all accepted articles. Elsevier's production group will redraw and enhance labels and drawings as needed for clarity and consistency. Authors will be able to review these figures when they receive the article.
Number references in the order they appear in text using a consistent style. Where applicable, include author(s) name(s), journal title/book title, chapter title/article title, year of publication, volume number/book chapter and the pages. Use of DOI is highly encouraged. Missing data will be highlighted for the author to correct. If you wish to format the references yourself, use AMA Style. The following are examples:
Davis JT, Allen HD, Powers JD, et al. Population requirements for capitation planning in pediatric cardiac surgery. Arch Pediatr Adolesc Med. 1996;150:257-259.
Champlin RER, Feig SA, Ho WG, et al. Bone marrow transplantation for acute lymphoblastic leukemia in remission: Importance of extramedullary involvement [Abstract]. Blood. 1982;60 (Suppl 1):165a.
Ringsven MK, Bond D. Gerontology and Leadership Skills for Nurses. 2nd ed. Albany, NY: Delmar Publishers; 1996.
Phillips SJ, Whisnant JP. Hypertension and stroke. In: Laragh JH, Brenner BM, eds. Hypertension: Pathophysiology, Diagnosis, and Management. 2nd ed. New York, NY: RavenPress; 1995:465-478.
Journal names should be abbreviated according to the List of Journal Title Abbreviations.
Citations in Text
Every reference cited in the text should appear in the reference list (and vice versa). Unpublished results and personal communications are not recommended in the reference list, but may be mentioned in the text. If these references are included in the reference list, they should follow the standard reference style of the journal and should include a substitution of the publication date with either “Unpublished results” or “Personal communication.” Citation of a reference as “in press” implies that the item has been accepted for publication.
Increased discoverability of research and high quality peer review are ensured by online links to the sources cited. In order for us to create links to abstracting and indexing services, such as Scopus, CrossRef and PubMed, please ensure that data provided in the references are correct. Incorrect surnames, journal/book titles, publication year and pagination may prevent link creation. When copying references, please be careful as they may already contain errors. Use of the DOI is encouraged.
A DOI can be used to cite and link to electronic articles where an article is in-press and full citation details are not yet known, but the article is available online. A DOI is guaranteed never to change, so you can use it as a permanent link to any electronic article.
An example of a DOI citation for an article not yet published is:
VanDecar JC, Russo RM, James DE, Ambeh WB, Franke M. Aseismic continuation of the Lesser Antilles slab beneath northeastern Venezuela. J Geophys Res. 2003. https://doi.org/10.1029/2001JB000884.
Please note the format of such citations should be in the same style as all other references in the paper.
As a minimum, give the full URL and the date last accessed. Also give, if known: DOI, author names, dates, reference to a source publication, etc. List web references separately (e.g., after the reference list) under a different heading if desired, or in the reference list.
Cite underlying or relevant datasets in your manuscript by including them in your text and as a reference in your Reference List. Data references should include the following elements: author name(s), dataset title, data repository, version (where available), year, and global persistent identifier. Add [dataset] immediately before the reference so we can properly identify it as such. The [dataset] identifier will not appear in your published article.
Supplementary material such as applications, images and sound clips can enhance your article and are published exactly as they are received. Submit your material together with the article and supply a concise, descriptive caption for each supplementary file. If you wish to make changes to supplementary material during any stage of the process, please provide an updated file. Do not annotate any corrections on a previous version. Please switch off the “Track Changes” option in Microsoft Office files to avoid their appearing in the published version.
ASTRO Journals accept videos and animation to support and enhance your research. Include links to these within the body of the article, noting where they should be placed. Name files according to their content. We accept files with a maximum size of 150 MB per file. Video and animation files will be published online in the electronic version of your article in Elsevier Web products, including ScienceDirect.
Please supply an image of your video content: you can choose any frame from the video or animation or make a separate image. This image will be used to personalize the link to your video data. For more detailed instructions please visit our video instruction pages. Note: since video and animation cannot be embedded in the print version of the journal, please provide text that refers to the content for both the electronic and the print version.
Include interactive data visualizations in your publication and let your readers interact and engage more closely with your research. Follow the instructions here to find out about available data visualization options and how to include them with your article.
Revisions must include the following elements:
- Detailed Response to Reviewers (anonymized)
- Marked version of the revised manuscript (tracked changes preferred)
- Clean version of the revised manuscript
- Clean versions of supporting documents
Please do not include:
- Identifying information on the Detailed Response to Reviewers document
- The original, unrevised manuscript document
- Marked version only of all supporting documents (tables, figures, supplemental files)
Authorship, according to ICMJE recommendations, is based on the following criteria:
- Substantial contributions to the conception or design of the work; or the acquisition, analysis, or interpretation of data for the work; AND
- Drafting the work or revising it critically for important intellectual content; AND
- Final approval of the version to be published; AND
- Agreement to be accountable for all aspects of the work in ensuring that questions related to the accuracy or integrity of any part of the work are appropriately investigated and resolved.
All authors should review the final manuscript prior to submission. Co-authors should ensure all disclosures are reported.
Changes to Authorship
Authors should carefully consider the list and order of authors before submitting their manuscript and provide the final list of authors with the original submission.
Make any addition, deletion or rearrangement in the authorship list before the manuscript has been accepted. Only in exceptional circumstances will the editor consider the addition, deletion or rearrangement of authors after the manuscript has been accepted. While the editor considers the request, publication of the manuscript will be suspended. If the manuscript has already been published in an online issue, any changes approved by the editor will result in a corrigendum.
In addition to the corresponding author, specify the name of the author(s) responsible for any statistical analyses and who may be contacted in case of questions.
For ASTRO Journals publishing ethics information, please see our ethics page here.
For information on production and publication of ASTRO journal articles, please see our production information page.
Please address any inquiries to our editorial office: